Sorry, you need to enable JavaScript to visit this website.
Berend Harmsen's picture

How to set up ADB via WiFi

Detailed question: 

How to set up ADB via WiFi

Assuming you have ADB via USB working on your computer, and you have both devices properly connected to WiFi, you can set up ADB via WiFi:

  • Run: adb shell ifconfig wlan0
    • This will give you the ip address used for WiFi by Bridge
    • You can also find this on the device via (Settings -> WiFi -> select active connection)
  • Switch ADBD to network mode by running: adb tcpip 5555
    • Device should respond with message: restarting in TCP mode port: 5555
  • Now disconnect the USB connection between the device and the PC
  • Connect to the device via WiFi by running: adb connect <ip-address>:5555
    • <ip-address> is the TomTom Bridge ip value you retrieved earlier
  • run: adb devices
    • you should see the device listed with IP address and port 5555
  • You can now connect to the device via WiFi. Note that a reboot will put adbd back into USB mode.